*All Products Available for Purchase or Daily Rentals
Zoneguard®
Zoneguard®, a portable steel barrier system, offers the road construction industry a revolutionary temporary barrier solution that provides superior protection. A cost-effective alternative to the traditional concrete barriers, Zoneguard’s lightweight configuration allows 750 LF to be hauled on one truck and up to 1000 LF to be installed in one hour. Zoneguard’s lightweight does not affect its performance, as it meets both NCHRP 350 (TL-3 & TL-4) and MASH (TL-3) crash test standards. Finally, a safe temporary barrier solution that doesn’t weigh down your bottom line.
FEATURES
- Withstands nuisance impacts better than traditional concrete
- Meets NCHRP 350 and MASH TL-3 requirements
- Weighs 85% less than concrete
- Deployment rate 1500 ft/hr
ZONEGUARD® MOVABLE BARRIER SPECIFICATIONS
- Classification – Longitudinal Barrier
- Length – 50 ft.
- Width – 2 ft. 4 in.
- Height – 2 ft. 8 in.
- Test Level – NCHRP 350 TL 2 / 3 MASH TL-3
DOWNLOAD CENTER
Armorguard Gate and Mobile Steel Barrier
The ArmorGuard Steel Barrier Gate is a heavily reinforced gate designed for emergency openings, contraflow applications and work zone access. The steel barrier gate system can be safely opened or closed in under 2 minutes using only manual power. Optional pneumatic jacks can be added to make opening the gate even faster. The System is easy to maneuver on steeper gradients with the use of built-in navigation and braking till. The ArmorGuard Steel Barrier Gate has been performance tested on all road surface types including gravel. The ArmorGuard Steel Barrier Gate is available in 8, 12 or 16 m (26’, 39’ or 52’) sections.
FEATURES
- 160 mm (6”) Permanent Deflection, 8 m (26′) System tested
- Can be deployed on gradients up to 8%
- Robust transition design
- Easily installed on bridge decks and viaducts
- Available as a 8, 12 or 16 m (26, 39 or 52’) System
- Easily opens without electricity
- Performance tested to open and close in under 2 minutes.
- Pneumatic option available
- Ideally suited for rerouting traffic and for emergency access
ARMORGUARD GATE SPECIFICATIONS
- Classification – Longitudinal Barrier Gate
- Length – 8, 12, 16 m / 26, 39, 52’
- Width – 710 mm / 28”
- Height -840 mm / 33”
- 8 m (26’) System Weight – 2507 kg / 5527 lb.
- Perm. Deflection – 160 mm / 6”
DOWNLOAD CENTER
Water Walls
K&S Industries represents leading manufacturers of water walls that are lightweight barrier systems made of high-density polyethylene. Use of these water walls is both economical and convenient especially when compared to conventional concrete barrier wall. Applications of water barrier systems include:
- Temporary work zones
- Perimeter fencing
- Airport construction and maintenance
- Vertical construction
- Parking facilities
- Security checkpoints
- Municipal and public utilities
- Special events and crowd control
Water Walls
Cap & Pin Included (144=Full Load)
Features/Benefits
- TL-1 Barrier NCHRP-350 Accepted
- Durable polyethylene plastic minimizes cracking and breaking
- Molded through holes eliminate bowing when filled
with water - Double-wall knuckle design minimizes breakage at hinge points
- Hinge design allows for a 30-degree pivot between sections
- Large 8″ fill hole speeds filling process, includes twist- lock plastic cap
- New tamper-resistant, corner offset drain plug with coarse buttress thread – screws in or out in only 2 ½ turns
- Includes one steel connection pin that allows sections to be locked together
- Forklift/pallet jack slots at bottom allow for easy move- ment and transport
- Will accept plastic or chain-link fence (with extended connection pins)
Water Walls
Feature/Benefits
- The Water-Cable Barrier has been MASH Tested, Passed and Eligible at TL-1 31 mph (50 km/hr) and TL-2 43.5 mph (70 km/hr) levels
- Molded-in galvanized steel cables (3) strengthens water- cable barrier to resist vehicle penetration during an impact
- Double wall knuckle design minimizes breakage at hinge points
- Durable polyethylene plastic with ultra violet additives resist fading, cracking and breaking
- Hinge design allows for a 30-degree pivot between sections
- Large 8″ fill hole speeds filling process, includes twist-lock plastic cap
- Tamper-resistant drain plug with coarse buttress thread eliminates cross threading and quickly screws in or out in only 2½ turns
- Includes one steel connection pin that allows sections to be linked together
- Forklift / pallet jack slots for easy movement and placement
- Standard colors are orange/red or white — additional colors available upon request
Water Walls
The Sentry Water-Cable Barrier Wall has been MASH Tested, Passed and Eligible at TL-2 43.5 mph (70 kph) and TL-3 62.5 mph (100 kph) levels. Sentry Water-Cable Barrier weighs 160 lbs. (73 kg) empty and 2,000 lbs. (907 kg) completely full with 220 gal (832 l) of water. Sentry is 72 in. (183 cm) long, 43 in. (109 cm) tall and 22 in. (57 cm) wide. Four integrally molded corrosion-resistant steel cables prevent the impacting vehicle from breaching the Sentry Water-Cable Barrier.
The integrally molded steel cable and bushings allow for the creation of a free standing, continuous longitudinal water- cable barrier. Stacking lugs on the top and bottom of the Sentry make storage and transport a breeze
Forklift through holes and pallet jack slots make movement and placement of Sentry quick and easy. Interlocking knuckle design allows for positive connection between Sentry barriers while still maintaining up to a 15-degree rotation between sections.
- 8 inch (20.32 cm) diameter fill hole allows for quick filling
- Tamper-resistant drain plug with course buttress thread screws in or out in only 1.5 turns
- Sentry’s interlocking knuckles on each end positively link sections together with a galvanized steel T-pin
DOWNLOAD CENTER
Sound Barrier
Sound barrier system provides an effective, durable, and attractive noise-abatement solution along busy transportation corridors. AcoustaShield sound walls are exceptionally lightweight compared to traditional alternatives. Remarkably, the AcoustaShield system can be easily installed by a small crew without the use of heavy-lifting equipment.
12-inch and 6-inch high horizontal panel systems are available and each is easily customized to meet the unique design needs of most any installation. AcoustaShield sound barrier products provide proven performance and have addressed traffic-noise concerns in countless communities across North America with various applications that include use on highways, transit lines, retail, commercial and industrial areas. The sound barrier is also lightweight for bridge applications.
The AccoustaShield is winner of the FHWA Environmental Award for Excellence for recycled content. Contact your local branch for more information.
Water Walls
Cap & Pin Included (144=Full Load)
Features/Benefits
- TL-1 Barrier NCHRP-350 Accepted
- Durable polyethylene plastic minimizes cracking and breaking
- Molded through holes eliminate bowing when filled
with water - Double-wall knuckle design minimizes breakage at hinge points
- Hinge design allows for a 30-degree pivot between sections
- Large 8″ fill hole speeds filling process, includes twist- lock plastic cap
- New tamper-resistant, corner offset drain plug with coarse buttress thread – screws in or out in only 2 ½ turns
- Includes one steel connection pin that allows sections to be locked together
- Forklift/pallet jack slots at bottom allow for easy move- ment and transport
- Will accept plastic or chain-link fence (with extended connection pins)
