Barricade Lights and other Lighting

Type A Flashers

SOLAR ASSIST

Features/Benefits

• Internal solar panels trickle charge “D” cell Alkaline batteries to give a superior long-lasting more reliable power source
• Solar panels are internal providing less chance for damage and theft
• Our all-new line of Type A, C and 3-way, 3-volt high efficiency lights
• Features completely redesigned rugged and durable co-polymer case with breakaway internal candle
• Also available in 6V

TRUE SOLAR

Features/Benefits

• The 2006S is a true solar light
• Solar panels charge the internal High Capacity NiMH rechargeable battery
• Light intensity meets or exceeds the current ITE Purchase Specification
  referenced in the Federal MUTCD for Type A and Type C lights
• Features the same rugged and durable co-polymer case as our other Model 2006 lights
• Also available in 6V

Type B High Intensity Flashers

BATTERY

Model 212-3LW is a 3-volt system that can operate on two to four D-Cell batteries. It will project an adequate signal for over 60 days on two D-Cell Alkaline Batteries and over 120 days with four D-Cell Alkaline Batteries.

Features/Benefits

• Lightweight high-intensity lights
• Acceptable device for NCHRP-350
• Operates on D-Cell batteries
• Tested to MUTCD and I.T.E. standards by an approved certified laboratory
• Polycarbonate lenses and high impact polypropylene housing
• Also available in 6V

SOLAR ASSIST

Features/Benefits

• Solar panel trickle charges D-Cell Alkaline batteries to give a superior long-lasting more reliable power source
• Operates on D-Cell Alkaline batteries
• No need to replace expensive rechargeable batteries like other solar lights
• Tested to MUTCD and I.T.E. standards by an approved certified laboratory (the light must function and meet output specifications without the solar panel hooked up for 168 hours)
• Polycarbonate lenses and high impact polypropylene housing

LED

Features/Benefits

• Meets current I.T.E. and MUTCD standards
• Tested in an approved certified laboratory
• Available in 12-volt, 6-volt or 3-volt configurations
• Can operate on one or two spring terminal batteries in 3-volt or 6-volt configurations
• May be considered a lightweight light meeting NCHRP 350 when using one battery. Lights have also been tested on various devices.
• Red lens option available as pictured

Type C Steady Burn

SOLAR ASSIST

Features/Benefits

• Internal solar panels trickle charge “D” cell Alkaline batteries to give a superior long-lasting more reliable power source
• Solar panels are internal providing less chance for damage and theft
• Our all-new line of Type A, C and 3-way, 3-volt high efficiency lights
• Features completely redesigned rugged and durable co-polymer case with breakaway internal candle
• Also available in 6V

TRUE SOLAR

Features/Benefits

• The 2006S is a true solar light
• Solar panels charge the internal High Capacity NiMH rechargeable battery
• Light intensity meets or exceeds the current ITE Purchase Specification
  referenced in the Federal MUTCD for Type A and Type C lights
• Features the same rugged and durable co-polymer case as our other Model 2006 lights
• Also available in 6V

Type D Airport Flashers

A red 360 degree light used specifically for airport applications.

SynchroGUIDE

Designed to easily deploy and create a unique intelligent wireless sequential operation of lights in forming a clear directional path for traffic during lane closures.

• Intelligent wireless technology – No wires for signal transmission
• Deploys in any order
• Unique independently field proven technology
• NCHRP 350 Crash Compliant
• FHWA MUTCD 6F.63.08 compliant

CO Nighttime
CO Daytime

Additional Information:
SynchroGUIDE Brochure
SynchroGUIDE User Instructions

Pi-Lit Sunflower Cone Lamp

Truck Mounted Lights

K&S Industries represents leading manufacturers of truck mounted lights with both light bars and rotating beacons. In general, any work vehicle operating in the work zone, including those used for traffic control operations, for materials delivery, and by subcontractors must be identified as a work vehicle to minimize driver confusion. This is why warning lights are used on each vehicle. The MUTCD requires the use of vehicle warning lights, as do most state and local agencies.

Truck Mounted Lights

MMBSLEDFLM-C/A

12/24V, compact LED display
Low current draw, 1.4A at 12.8 volts

MMBLEDLPMR3-C/A

12/24V, 17.25″ low-profile LED mini bar – only 2.75″ tall
Aerodynamic – 360 degree – wide angle inner lensing

MINILP-C/A — Permanent Mount

12/24V, 13.5″ low-profile LED mini bar – only 2.75″ tall
Aerodynamic – 360 degree – wide angle inner lensing

MINILP-C/A — Magnetic Mount

12/24V, 13.5″ low-profile LED mini bar – only 2.75″ tall
Aerodynamic – 360 degree – wide angle inner lensing

Truck Mounted Lights

LED400-A

12/24v DC, 1.2 amp maximum current draw SAE Class 1 light output,
5-year warranty

LED625-A

High-power 360-degree multi-flash LED warning light with a super bright LED light source
2-hole bolt permanent-mount base

LED625F-A

High-power 360-degree multi-flash LED warning light with a  super bright LED light source
3-hole flange base

LEDQ375-A

Described as the brightest “little” light on the market today
72 quad-flashes/min

LEDQ375MX-A

Described as the brightest “little” light on the market today
72 quad-flashes/min

PSLM4-A

Personal safety LED light with a selectable pattern
User selectable – 4 flash patterns to choose from

PSLM2H-A

All purpose “high output” multi-use signal light
50% more light output

PSLM4-R

All purpose “high output” multi-use signal light
Two operating modes:
Flashing
Steady burn

Portable Lighting

K&S Industries represents leading manufacturers with a variety of temporary portable lighting products used for nighttime work in work zones. It’s important to note that any lighting scheme provided for nighttime work zones needs to meet all standards found in the MUTCD, including guidelines related to personal protective equipment, signing, barricades, or other traffic control measures. When placed properly, the presence of portable lighting reduces motorist speeds approaching and while navigating the work zone thereby increasing safety for both workers and motorists. All portable lighting systems, either our portable light towers or balloon lighting, are quick and easy to set up.

Portable Lighting

Ver-Mac’s PSLT-6000 is a compact and powerful portable solar light tower. It is visually as bright, effective and compact as conventional diesel light towers, without costing thousands of dollars every year in fuel and labor. The PSLT-6000 features Ver-Mac’s exclusive Nightbrite technology, which provides a brighter, more environmentally friendly and cost-effective lighting system. The PSLT-6000’s compact design and lighting efficiency makes it ideal for lighting construction work zone, parking lot, special events, emergency response and oil and mining applications.

PSLT-6000 FEATURES AND BENEFITS

• Nightbrite technology – Innovative proprietary LED fixture design provides 40% increased brightness using the same power consumption, compared to other solar light tower systems.
• Clear and Bright LED lamps – Long-lasting and durable LED lamps provide targeted lighting with minimal light pollution and reduced glare.
• Intelligent controller – Schedule and control the brightness and length of your lighting event. Ver-Mac’s easy-to-use selector switch provides multiple brightness and timing settings.
• Compact design – Easy to move around and set up
• Power platform – Robust power platform combined with energy-efficient Nightbrite technology provides year-round autonomy in most applications. No recharging required!
• Low cost of ownership – Eliminate fuel, fuel labor, engine maintenance and sodium light replacement costs, and save thousands of dollars per year
• 26’ telescopic mast with solar tilt – Galvanized adjustable and rotatable mast design combined with solar tilt provides quick and easy set-up and installation
• Environmentally friendly – No fuel emissions and engine noise to harm the environment
• Foldable & lockable tongue – Reducing operation & storage footprint for limited space areas and protecting the trailer from being towed by unauthorized people.

GENERAL SPECIFICATIONS

• LED lamps: 6 adjustable fixtures
• Luminosity: up to 63,000 lumens total
• Batteries: 940 A/h wired in a 24-volt system
• Battery charger: 25 amp
• Solar panels: 900 watts total / 320 degree rotation
• Mast: 26’ (8m) galvanized mast
• 4 outriggers for trailer stabilization