Barricades, Drums and Channelizers

Type I Barricades

Configuration

• Type I Horizontal
• Type I Vertical
  – Single-Panel Double-Faced (self-erecting)
  – Double-Panel Configuration

Reflective Sheeting

• Engineer-Grade Prismatic
• High-Intensity Prismatic
• Diamond-Grade Prismatic

Panel Substrata

• .350″ Thick Solid Polyethylene
• .50″ (nominal) Plywood
• .080″ Thick Aluminum

Sizes

• 24″x8″ – Horizontal
• 24″x12″ – Horizontal and Vertical
• 36″x8″ – Horizontal
• 36″x12″ – Horizontal and Vertical

Type II Barricades

Reflective Sheeting

• Engineer-Grade Prismatic
• High-Intensity Prismatic
• Diamond-Grade Prismatic

Panel Substrata

• .350″ Thick Solid Polyethylene
• .50″ (nominal) Plywood
• .080″ Thick Aluminum

Sizes

• 24″x8″
• 24″x12″ Top Panel
• 24″x8″ Bottom Panel
• 36″x8″
• 36″x12″

Legs

• Steel Legs
• All Plastic Legs

Type III Barricades

Reflective Sheeting

• Engineer-Grade Prismatic
• High-Intensity Prismatic
• Diamond-Grade Prismatic

Panel Substrata

• .290″ Thick Solid Polyethylene
• .750″ Thick “Hollow Core” Polyethylene
• 1/2″- 3/4″ Plywood
• 3/4″- 2″ Solid Wood

Colors

• Orange and White Stripes
• Red and White Stripes
• Custom Striping Available

Sizes

• 48″x8″
• 72″x8″
• 96″x8″, 96″x10”, 96″x12″
• Larger Sizes Available up to 144″x12″
• Custom Widths Available

Stand Options
(check your state’s approved device lists)

• Wood
• Steel & Uni-strut
• Plastic

Drums & Bases

Channelizer Drums and Bases are engineered to withstand the harshest traffic, construction, and weather conditions. Because of their durability, they’re very cost-effective. They’re also easy to set up and take down. The innovative snap-on bases lock secure and tight to the drum. The base’s bottom design hugs tightly to road surfaces.

Features/Benefits

• Durable, blow-molded construction
• Low-density polyethylene
• 5-tier telescoping design
• Built-in carrying handle on drum and base
• Positive-locking grip between drum and base
• Four available base options with anti-rotation knob
• Shift-resistant base design
• Light attachment on both sides
• UV-stabilized bright orange polyethylene is formulated to resist fading and discoloration
• The barrel body and bottom section both incorporate a non-circular cross section to inhibit rolling after impact
• Drum bases snap on and lock securely to the drum (25 lb. plastic base or 35 and 40 lb. rubber base) and hug tightly to the road
• Bases feature a built-in carrying handle

Drum Bases

• Plastic bases, 25 lb. rubber bases, 35 lb. rubber bases and 40 lb. rubber bases can be used on any of our drums
• Bases snap on and lock securely to the drum
• Anti-rotation knob keeps the barrel in position
• Grid pattern on the bottom of our rubber bases – hugs tightly to the road
• Bases feature a built-in carrying handle

Vertical Panels

STEP-N-LOCK PANELS

Features

Six locking buttons are molded into the panel and correspond to six matching recesses molded in the base. Simply step down on the foot hole to lock the panel in place. The Step-n-Lock design ensures the panel will remain vertically locked in place and “square to traffic.” Panel sizes, messages and legends can be intermixed with either the 28 or 43 lb. base

A-Frame Style Barricades

Features & Benefits

The O-Frame works like a traditional A-Frame barricade but it is far superior! It allows crowds to be cordoned off and has many other distinct advantages like exceptional strength and a unique feature for branding!

• A focus on safety
• O-Frame provides a continuous edge detectable by pedestrians using a long cane for guidance
• Bottom of the panel is less than 2.5 inches (62 mm) above the ground
• Reduced trip hazard for pedestrians
• Flexibility to convert to a Type I or Type II using the same components
• UV stable thermo-plastics for superior durability
• Panels have smooth surfaces to allow easy application of reflective tape
• Panels available in 4, 6, 8, 10 and 12-foot
  standard lengths
• Rigid injection molded legs will not sag in the heat of the sun
• Barricade legs stack for easy transit and storage

Crowd Control Barricades

Features/Benefits

• Linking design creates secure, tamper-free, connections
• Units adjust to uneven ground
• High visibility, anti-trip feet
• Panels on both sides for retroreflective sheeting
• Holes for signs to be affixed
• Available in orange, yellow, white and blue

Specifications for single section

• Height with feet – 39.4″
• Length – 79″
• Total Weight – 24 lbs.
• Sheeting area is 5.5″ x 51″ on each side

Airport Barricades — Lo Pro

Low-profile interlocking barricade system used to close taxiways, and runways, and delineate construction areas.

Features

8 ft. long and 10 in. high barricade, units interlock

• • • Durable construction, 25 lbs.
      • Enhanced wall thickness on barricade bottom
      • Molded reinforcing ribs add stiffness and strength
    • Connectors are molded into the barricade, no pins to lose
      • Allows interconnected units to pivot in multiple orientations
      • Between 900 and 1800
    • 70 angled sidewall
      • Facilitates visibility
      • Accepts 72″L x 6″H continuous retroreflective sheeting
    • Fill with up to 220 lbs. (26 gallons) of water
      • Two fill holes and one drain hole
    • Accepts two styles of lights
      • 360-degree round, screw-on airport lights
      • Standard barricade, bolt-on lights
    • Two flag mounts
    • FOD (foreign object debris) free

Barricade ADA Walls

Features

• MUTCD/NCHRP-350 accepted as a barricade
• Two Step-N-Deploy legs make deployment quick, easy and safe
• An ergonomic handrail provides a comfortable and secure guide through the work zone
• Locations for two (2) barricade lights
• Protect pedestrians from work zone hazards
• Four (4) molded-in stacking lugs for secure transport and storage
• Two standard colors available: Orange and White
• Optional leg set for non-ADA applications
• UV inhibitors to minimize fading
• Made of flexible low-density polyethylene
• Stackable for easy storage and transportation
• Available with various size and types of reflective sheeting
• Parades/crowd control
• Pedestrian traffic control
• Barricade construction work zones
• Meets ADA standards
• Blow-molded connectors provide strength and flexibility

ADA Barricades

Features/Benefits

• ADA Compliant, no trip hazard for pedestrians
  • Meets or exceeds ADA Guidelines and MUTCD Standards
  • No sandbags needed!
• Linking sections are made up of two pieces that securely fit together
  • Top Wall – rugged polyethylene
  • Bottom Base – 43 lb. self weighted black base, with carry handle
• Modular system can be shaped to any layout
• Stable in windy conditions
• Quick and easy to install
• Anti-tamper linking system
  • Difficult for unauthorized personnel to dismantle when linked
• Compact stacking lowers transportation costs
• Available in orange or white, with or without retroreflective sheeting
• NCHRP-350/MASH accepted, meets  MUTCD standards

Specifications for single section with base
Height – 40″

Length – 43″

Width – 15.25″

Total Weight – 51 lbs.

Sheeting area is 6″ x 30″ on each side

Delineator Posts

300 SERIES
Features/Benefits

• The upright post is durable and incredibly tough FG 300 post
• The 2-part system uses a permanent anchor and replaceable upright post
• They are easy to install by hand or using common tools
• The anchor is a common 2″ square PSST sleeve
• A single pin allows for quick and easy replacement of damaged posts

400 AND 500 SERIES

Features/Benefits

• The first posts to exceed field performance standards using recycled polymers
• Superior outdoor weatherability and UV stabilized
• Select from Engineering Grade, High Intensity or Super High Intensity sheeting to meet state specifications and provide superb nighttime visibility
  Available in various lengths and colors
• Soil anchor systems are available
• Custom orders include colors and message decals for utility markers